Mixed bed ion exchanger made of stainless steel. Standard cartridge made of V4A stainless steel for general purpose application: To supply laboratory glassware washers for general laboratory maintenance and for small industrial consumers. For subsequent demineralization of reverse osmosis systems. Pressure resistant to 10 bar / 8 bar at E40dA. Optimum exploitation of the ion exchanger capacity due to absolute uniform water distribution in the unit. Flow rates up to 700 litres/hour. The unique behropur® jet nozzle system distributes the raw water over the entire resin bed. This ensures an optimum exchange capacity and quality can be connected to the raw water network directly and without a pressure reducer. Resistant to alternating pressure. Hard rubber collars vulcanized to the base and top of the unit offer effective protection. Convenient transport thanks to the handles embedded into the top part of the unit. Conductivity is controlled directly on the unit (installed measuring equipment) or with remote location meter. Also available with shut off when the limit value is reached and limit control Specifications E 28 / E 40 d. Exchange capacity* at 10°dH 2800 litres / 4000 litres Flow max. litres/hour 500 / 700 Diameter in cm 24 / 24 Height incl. LF in cm 74 / 84 Height of cartridge only in cm 60 / 70Type E28d.