KD Scientific Legato® 110 DRS (Dual Rate System) Syringe Pumps for Syringes 1 (0.5μl - 60ml)

Item No. 6288427

The new Legato 110 Dual Rate Syringe Pump System (Legato 110 DRS) offers researchers complete flexibility to start two pumps simultaneously for delivery of two independent flow rates. The pumps communicate through a special input/output cable included with the system.

Additional Details

Pack Size	ea
Weight	6.11
Weight Unit	Kg
Tariff Code	84131900
Country of Origin	United States

Additional Details

Pack Size	ea
Weight	6.11
Weight Unit	Kg
Tariff Code	84131900
Country of Origin	United States

Description

FEATURES

The Legato 110 DRS comes complete with two programmable infuse / withdraw syringe pumps along with an input / output communications cable to synchronously operate the pumps. This innovative syringe pump system allows the user to configure two different pumps with independent flow rates using the built in multi-step programming and input / output signal communication.
All control is set through the innovative Legato touch screen user interface. No external programming or computer is required.
Both syringe pumps in the system have a wide flow rate range from 1.28 pl/min to 88.28 ml/min. Each pump can be individually set for whatever the experiment requires.
The syringe pumps are compatible with stainless steel, plastic or glass. The syringes are held in place by KD Scientific’s new clamping mechanism designed to hold the syringes securely in place. Syringe sizes from 0.5 ul to 60 ml can be used. The Legato 110 Dual Rate Syringe Pump System has an accuracy of +/-0.5% and a reproducibility of +/- 0.05%.

SPECIFICATIONS

Accuracy	±0.5%
Syringes (Min/Max)	0.5µl to 60ml
Flow Rate	Minimum (0.5µl syringe): 1.28 pl/min
	Maximum (10ml syringe): 25.99 ml/min
	Maximum (60ml syringe): 88.28 ml/min
Display	4.3 WQVGA TFT Color Display with Touchpad
Non-Volatile Memory	Stores all Settings
Connectors	RS485 - IEEE-1394 6 pos
	USB - Type B
	I/O & TTL - 15 pin D-Sub Connector
Linear Force (Max)	13.6kg (30lb) @ 100% Force Selection
Drive Motor	0.9 Stepper Motor
Motor Drive Control	Microprocessor with 1/16 microstepping
Number of Microsteps	15360 (per one rev.of Lead Screw)
Step Revolution	0.069 µm/step
Step Rate - Minimum	27.5 sec/µstep
Step Rate - Maximum	26 usec/µstep
Pusher Travel Rate - Minimum	0.15 µm/min
Pusher Travel Rate - Maximum	159 mm/min
Power	100-240 VAC: 50/60 Hz, 50 W, 0.5 A fuse
Dimensions	22.6 x 19.05 x 15 cm (9 x 7.5 x 5 in)
Weight	2.66 kg (5.9 lb)
Operating Temperature	4°C to 40°C (40°F to 104°F)
Storage Temperature	-10°C to 70°C (14°F to 158°F)
Humidity	20% to 80% RH non condensing
Mode of Operation	Continuous
Classification	Class 1
Pollution Degree	1
Installation Category	11
Regulatory Certification	CE, UL, CSA, CB Scheme, EU RoHS