KD Scientific Legato® 200 Dual Syringe Infusion Pump for Syringes 2 (0.5μl - 140ml)

Item No. 6267701
Infuse only dual syringe pump. Accommodates 2 syringes. User definable flow rates with selectable target volume or time values to control the total infusion volume. This Legato® series syringe pump provides the smoothest most accurate flow available. The intuitive, chemically resistant touch screen enables the user to quickly create configurations and recall them for ease of use.

Additional Details

Pack Size ea
Weight 5.61
Weight Unit Kg
Tariff Code 84798997
Country of Origin USA
Contact us In Stock In stock
€ 3.336,28
price per ea
excluding tax
This product cannot be ordered at the moment.
Additional Details
Pack Size ea
Weight 5.61
Weight Unit Kg
Tariff Code 84798997
Country of Origin USA


  • Holds one or two syringes from 0.5µl to 140ml
  • High resolution color touch screen
  • Real time clock
  • Unparalleled ease of use
  • Touch pad "lock" feature
  • LED light on front panel
  • Full metal chassis
  • Built in syringe table
  • Up to 75lb linear force
  • Advanced micro-stepping techniques
  • Built in RS485 interface
  • USB port
  • I/O & TTL interface
  • Continuous mode of operation
  • Spill dam
Syringes (Min/Max)0.5µl to 140ml
Flow RateMinimum (0.5µl syringe): 3.06pl/min

Maximum (140ml syringe, 37.948mm inner diam): 215.8ml/min
Display4.3 WQVGA TFT Color Display with Touchpad
Non-Volatile MemoryStores all Settings
ConnectorsRS232 - 9 Pin D-Sub Connector

RS485 - IEEE-1394 6 pos

USB - Type B

I/O & TTL - 15 pin D-Sub Connector
Linear Force (Max)34 kg (75 lb) @ 100% Force Selection
Drive Motor1.8 degree Stepper Motor
Motor Drive ControlMicroprocessor with 1/16 microstepping
Number of Microsteps6400 (per one rev.of Lead Screw)
Step Rate - Minimum27.5 sec/µstep
Step Rate - Maximum26 usec/µstep
Pusher Travel Rate - Minimum0.36 µm/min
Pusher Travel Rate - Maximum190.80 mm/min
Power100-240 VAC: 50/60 Hz, 50 W, 0.5 A fuse
Dimensions16.51 x 25.4 x 27.94 cm (6.5 x 10 x 11 in)
Weight4.9 kg (10.75 lb)
Operating Temperature4°C to 40°C (40°F to 104°F)
Storage Temperature -10°C to 70°C (14°F to 158°F)
Humidity20% to 80% RH non condensing
Mode of OperationContinuous
ClassificationClass 1
Pollution Degree1
Installation CategoryII
Regulatory CertificationCE, UL, CSA, CB Scheme, EU RoHS