OVERVIEW OF PROMOTIONS (CLICK EACH INDIVIDUAL OFFER to view details)

New motorized electronic pipette combination of tangible quality
with high usability and comfort

• Fourteen models from 0.5 µL to 10 mL
• Easy operation: Minimal number of buttons
• Higher productivity: Repetitive pipetting mode
• Fits naturally in your hand: Adjustable hook
• Universal: May be set to suit left- or right-handed users

Replaces any breakable glass burette or high end titration automate. Powered by solar panels

• Informative: Easily readable, large LC display
• Tested: Individual quality certificate, conformity certified
• Future-oriented: Serial, bi-directional interface
• Easy to service: All valves are easily exchangeable

Top-quality reliable measuring unit offering a high degree of user-comfort

• Consistent: Ceramic piston and dimensional stability
• Precise: Rapid volumetric adjustment, graduated gauge
• Comprehensive: From 0.2 ml to 60 ml, fixed and variable
• Safe: Individual certificate of quality with conformity declaration
• Professional: User-independent consistent volumetric delivery

Designed and packaged for superior handling

Redesigned reservoirs with thicker walls, crush-resistant “turrets” at the corners, improved pour spouts, 25 mL graduation marks, and tabs.

Patent pending adjustable pivot arm and liquid crystal display

• LCD with easy-to-read battery charge levels
• Rechargeable batteries for 8 hours of continuous operation
• For pipettes ranging from 1 to 100 mL

Range of tips from Kartell in different colors, amounts and racks

Although these tips are primarily designed to fit the Kartell range of pipettors, the Kartell range of tips can be used with complete confidence on other units

Consistent accuracy with micro-computer, making piston movements operator-independent

• Simple one-hand operation even with gloves
• Self-calibrating prevents measurement errors
• Automatic linearity correction compensates for errors
• Rechargeable Li-Ion battery provides over 3000 cycles on one hour charge

ALL of Reagecon’s accredited pipette calibration services are guaranteed 10 measurements at each of 3 volumes.

Anything less does not allow assessment of the pipette against manufacturers' or users' specs, and does not comply with ISO 8655-6, which specifies that less than 10 measurements by 3 volumes is a check and not a calibration.

Call Reagecon today for a quote for our comprehensive calibration services:
- Volume
- Weight
- Temperature
- Electrochemistry
- Instrument Qualification

With a measuring range from 0 to 15,000mg/l O2, the Aqualytic CheckitDirect COD VARIO is suitable for waste water testing.

• Two LED light sources with long-term stability
• Waterproof sample chamber
• Large digital display
• User-friendly keypad

The PRM-85 is an ultimate In-line Refractometer, which continuously measures refractive index, Brix, or the concentration of the liquid flowing through a pipe.

• Automatic Temperature Compensation
• Detection section is equipped with air cooling fan
• Refractive index 1.3220 to 1.5040/Brix 0.0 to 85.0%
• Measurement Temperature: 5 to 100°C

Versatile sampling system with exchangeable tools for a wide range of applications. Ideal for sampling from baths, tanks, shafts and open waters.

• Sampling depths down to 6 m
• Optimized telescopic rods with optional bottle holder
• Beaker types: Angular, Pendulum or Stainless Steel
• Tools are attached to the rod by a practical snap-in joint

Our water testing product range covers a huge variety of products and brands, from sampling collection, through to testing equipment, reagents and standards, including:

• Drinking Water Sampling Bottles
• Certified Reference Materials, including, ground, river and surface
• water trace elements
• Ion Chromatography Standards
• Hazen Colour Standards
• Carbon Standards (Total Organic and Inorganic)
• On-Line Reagents
• Culture Media for Water & Sewage Testing
• Portable and Bench Top Photometers
• Powder Pillows and Reagents for Photometers

Talk to your Key Account Manager or Customer Care Representative who will be happy to provide details of Water Testing Packages to suit your business.

Mechanical overhead stirrer with digital display

• Robust, slimline, ergonomic design
• With constant power-drive
• Two speed ranges for universal use from 60 - 2.000 rpm
• Push-through agitator shafts (only when stationary)
• Stirring quantity (H2O): 20 l

High-performance dispersing instrument for volumes 1 - 2.000 ml (H2O)

• Applications range from homogenizing waste water samples to the use
• in laboratory reactors
• Three types of shaft bearings
• Standard version with digital display
• Rotor-Stator configurations have thirty years of proven, guaranteed
• comparability of test results

Heated unstirred thermostatic controlled stainless steel bath 300mm x 150mm x 150mm, 230V, 50/60Hz, 400W, 4L, ambient to 100 x 0.25°C Temperature

• Sensitivity, °C : +/- 0.3
• Stability, °C : +/-0.25
• Temperature range, °C : Ambient to 100
• Uniformity, °C : +/- 0.1

Heated unstirred thermostatic controlled stainless steel bath 300mm (tapering down to 280mm) x 240mm x 150mm, 230V, 50/60Hz, 800W, 8L, ambient to 100 x 0.25°C Temperature

• Sensitivity, °C : +/- 0.3
• Stability, °C : +/-0.25
• Temperature range, °C : Ambient to 100
• Uniformity, °C : +/- 0.1

The SuperSpinner is the next generation of incubator-based cell cultivation devices. Advanced technology, ease of operation and low cost make the SuperSpinner ideal for cell culture experiments.

• Fully pre-assembled bioreactor
• High cell density
• Seed-Train bioreactor
• Feeding of supplements
• Flask compatible to standard rotors

Vivacon centrifugal concentrators offer the optimal solution for DNA concentration and buffer exchange applications using their high recovery Hydrosart® membrane.

• Vivacon 2 Applications
• DNA rebuffering of organic extraction samples before
• sequencing reaction
• Dye removal after sequencing reaction
• Primer removal
• Plasmid concentration

Holding up to eight flasks or bottles, up to 500ml capacity, it creates a vigorous mixing action by simulating hand shaking. Mounted on four rubber feet to absorb vibration.

• Timed operation or continuous running
• Robust construction
• Ideal for extractions

These roller mixers provide a gentle, but highly efficient, rocking and rolling action.

• Nine roller design for larger capacity
• Designed for continuous quiet operation
• Can be used in cold rooms or in incubators

The Membrane screw cap for laboratory glass bottles is especially suitable for packing and storing gas-generating liquids, in particular hazardous chemicals.

• Made of proven PP-material with welded PTFE membrane
• Temperature-resistant up to +140°C
• 2-way membrane with pressure compensation from 0.1 bar
• Ideal for use in autoclaving
• Available for different bottle types of GL series

Duran have extended their laboratory glassware range with this new Wide Neck Bottle ideal for filling and pouring.

• Bottle completed with PP quick-release cap and PP pouring ring
• Wide Neck Screw Thread - 80 mm
• Makes cleaning the bottles particularly easy
• Traceability – batch and quality certs available
• Labelling – provided with a printed white panel

QUANTOFIX® test sticks meet the most important requirements for a modern quick-test:

• Rapid - dip and read
• Convenient - analysis can be carried out without further equipment,
• only a single test stick is needed
• Possible interferences are eliminated by precipitation or masking
• Stable shelf life 2 1/2 years after production (below +30 °C)
• 36 parameters (Aluminium through to Tin)

These Nitrile Gloves are powder free with strong beaded cuffs and are as soft, supple and comfortable to wear as natural rubber latex.

• Single Use
• Conform to EN455, EN374/2 and EN374
• Seamless and chlorinated

Volumetric flasks made of pigmented plastic PMP

• Includes screw cap made of PP
• Class A according to DIN EN ISO 1042
• Translucent and individually ring-marked
• With imprinted lot-number and lot-certificate
• Available in various sizes

Whatman Cyclopore™ and Nuclepore™ membranes are true pore size microporous membranes.

• Made of proven PP-material with welded PTFE membrane
• Temperature-resistant up to +140°C
• 2-way membrane with pressure compensation from 0.1 bar
• Ideal for use in autoclaving
• Available for different bottle types of GL series

BugStopper is a unique, reusable closure, providing an ideal sterile vent for culture vessels.

• Autoclavable in use to maintain solution integrity
• Available in two sizes to fit a wide variety of culture flasks
• Repeated use minimizes cost
• Units push themselves into place and are ready to use

BugStopper 10 fits flasks which accept size 8-1/2" to 10-1/2" stoppers.